|
HIGH DENSITY PELTIER MODULES (HDPM) |
|
Features
Maximum cooling density up to 18 Watt/cm²
Example
- High Density Peltier-Module 40 x 40 x 0.55 mm transfers > 250 Watt (Qcmax)
- Standard Peltier-Module 40 x 40 x 0,55 mm transfers ~ 100 Watt (Qcmax)
- Increase of cooling capacity, compared with standard Peltier modules is > multiplier 2-3.
|
|
|
Technical parameters:
- Maximum temperature drop ΔT max at I=I max , Q=0 – within range 60-67 K.
- Heat flow density output on TEC's cold side in maximum cooling capacity mode at I=Imax and ΔT = 0 – within range 7 - 18 Wt/cm².
- Maximum current at ΔT = ΔT max – within range of 10 - 25 A.
- Heat absorbing surface area of the module – within range of 4 - 27 cm².
- Module height: within range 3.00 - 4.00 mm.
- Height of thermoelements: within range 0.30 -0.55 mm.
- Elements cross-section area: within range 0.50 - 2.00 mm.
- Number of the thermoelements in module; within range of 30 - 290 n-p pairs (couples').
|
|
Tentative Data Sheet |
Catalog Number |
T hot =27°C |
RAC
Ohm,
25°С |
Dimensions, mm |
I max
A |
Umax
V |
Q max
Wt |
dT max
C |
A1 |
A |
B |
H |
QCC-128-1.0-0.5-L2 |
8.9 |
16.3 |
89.8 |
68 |
1.39 |
30 |
34 |
30 |
2.8 |
QCC-242-1.0-0.5-L2 |
30.8 |
169.7 |
2.63 |
40 |
44 |
40 |
QCC-288-1.0-0.5-L2 |
36.7 |
201.9 |
3.13 |
40 |
44 |
40 |
QCC-200-1.0-0.6-L2 |
7,6 |
25.3 |
120.7 |
71 |
2.51 |
40 |
44 |
40 |
3.1 |
QCC-288-1.0-0.8-L2 |
5.7 |
36.7 |
129.2 |
71 |
4.90 |
40 |
44 |
40 |
3.1 |
QCC-127-1.4-0.4-L2 |
23.2 |
16.2 |
231.0 |
68 |
0.57 |
40 |
44 |
40 |
3.1 |
QCC-128-1.4-0.6-L2 |
14.9 |
16.3 |
152.3 |
68 |
0.82 |
40 |
44 |
40 |
3.3 |
QCC-200-1.4-0.6-L2 |
25.5 |
236.8 |
1.29 |
40 |
44 |
40 |
QCC-242-1.4-0.6-L2 |
30.8 |
285.9 |
1.56 |
52 |
56 |
52 |
QCC-288-1.4-0.6-L2 |
36.7 |
340.3 |
1.86 |
52 |
56 |
52 |
QCC-200-1.4-1.14-L2 |
7.8 |
25.5 |
125,4 |
68 |
2.43 |
40 |
44 |
40 |
3.3 |
QCC-288-1.4-11.4-L2 |
36.7 |
180.0 |
68 |
3.56 |
52 |
56 |
52 |
QCC-128-2.0-0.8-L2 |
22.4 |
16.3 |
227 |
71 |
0.55 |
55 |
59 |
55 |
4.0 |
|
* - porch style modules. Figures in brackets correspond size of hot side ceramic plate. |
I max, Umax, Qmax tolerance: ± 5%.
RAC standard tolerance: ± 10%; ± 5% is possible by request.
All Module with thickness tolerance ±0,02mm
Sealing: Silicon und Epoxy
|
|
HIGH DENSITY PELTIER MODULES (HDPM) |
|
- HDPM is a new high tech development
- HDPM’s are exclusively customized Products
- A minimum quantity is necessary
- HDPM’s can have customized geometry
|